Skip to main content

Analogue audio connections

Output Level connection

Important note: Before making a connection, set the Output Level switch to 'Line (Alva TT/ST)'. Do not connect to an external phono stage.

analogue-connection

Phono connection

Important note: Before making a connection, set the Output Level switch to 'Phono (External)'. Do not connect to the Line input of an amplifier.

analogue-phono

Bluetooth connection

bluetooth

Pairing

Press and hold the Pairing button for 2 seconds to enter pairing mode.

If you haven't connected your turntable to a Bluetooth device previously, do the following.

  1. Make sure your Bluetooth device is set to pairing mode (see your Bluetooth device instructions for how to do this).
  2. Make sure that there's no other Bluetooth device that is in pairing mode near the turntable, such as a mobile phone.
  3. The turntable will automatically pair to your Bluetooth device.

Press and hold the Pairing button for 10 seconds to clear connections and turn off Bluetooth.

Note: By default, the Bluetooth will attempt to connect to the last paired device.

LED Status

Fast flashing – In pairing mode.

Slow flashing – Searching for the last paired device.

Solid – Paired to a device.

Long solid intervals – Paired to a device using aptX/aptX HD codec.