Skip to main content

rear-view

1. Lid

2. Lid hinges and fasteners

3. Ground

4. Output level (Phone/Line) switch
With the switch position set to Line (Alva TT/ST), the internal phono stage will be used.
With the switch position set to Phono (External), an external phono stage needs to be used.

5. Signal output sockets
Caution - You must connect appropriately based on output level switch position.

6. Bluetooth status with LED On/Off switch

7. Bluetooth pairing button

8. Power socket
Alva TT v2: AC power socket
Alva ST: DC 12V 2.0A power adaptor socket