Auto Power Down (APD)

Auto Power Down (APD)

The product will automatically switch to standby mode after inactivity of 20 minutes. To enable or disable this function, see below instruction:

Important note: Make sure that the DacMagic 200M is in the Standby state, before performing any APD functions.

apd function

APD OFF - Press and hold down the Volume knob for 5 seconds, and wait for the Input LEDs to blink 2 times.

APD ON - Press and hold down the Volume knob for 10 seconds, and wait for the Input LEDs to blink 5 times.