Troubleshooting

There is no power

• Ensure the AC power cord is connected securely.
• Ensure the plug is fully inserted into the wall socket and is switched on.
• Check fuse in the mains plug or adaptor.

There is no sound

• Make sure the unit is not in Standby mode.
• Check that source component is properly connected.
• Check that your speakers are properly connected.
• Ensure that the correct input has been selected via the Balanced/Unbalanced switch.
• If possible, use different interconnect cables and speaker cables.
• Check your source devices’ volume control to ensure this is not muted.
• Check with alternative source device.

There is no sound on one channel

• Check speaker connections.
• Check interconnects.

There is weak bass or diffused stereo imaging

• Ensure that speakers are not wired out of phase.

There is a loud buzz or hum

• Ensure no interconnects are loose or defective.

The LED standby button is red

• Check the ‘Protection Circuitry’ section for troubleshooting steps.