주요 콘텐츠로 건너뛰기

Rear panel

rear

1. AC Power Socket.

2. Signal Output Sockets - RCA connections used to connect to a line-level input.
Note: Do not connect to a phono-level input.

3. Balance Control - Used to make fine adjustments to the relative output levels of the left and right channels. In the central position the output from each channel is equal.

4. MM Input Sockets - RCA connections used to connect to a turntable fitted with a moving-magnet cartridge.

5. Ground Connection Screw - If your turntable has a separate grounding lead then connect here. This provides shielding to the tonearm and the sensitive circuitry in the turntable.

6. MC Input Sockets - RCA connections used to connect to a turntable fitted with a moving-coil cartridge.
Note: Recommended cartridge specifications 0.3-1mV output voltage, 100ohm/100pF loading.