Skip to main content

Installation Instructions

1. Firstly, ensuring to match the polarity/colour coding, connect the supplied speaker terminals to the speaker outputs of your amplifier by unscrewing the ends, and securing the speaker cable in the available hole on each terminal. These terminals can then be installed into the rear of the MIN22 with the cables connected.

Min 22 Connections

2. If mounting the MIN22 speakers to a wall you will need to attach the included keyhole bracket using the mounting screw to the rear of the speaker.

Min 22 Bracket

3. Alternatively, we offer several other mounting solutions including a pivoting wall mount, desk stand, and floor stand.