Перейти к основному содержанию

Remote control

The AXR100D is supplied with a remote control that operates this unit and its built-in tuner. In addition, the buttons with Blue coloured icons can operate a matching AX CD player.

The supplied AAA batteries must be fitted before the remote control can be used 

  1. POWER BUTTON - Switches the unit between Standby mode and On.
  2. MUTE - Mutes audio on the unit. Press again to cancel mute.
  3. CD (BLUE COLOURED ICONS) - To operate the AXC players only. For more information refer to the AX CD user’s manual.
  4. SPEAKER A/B - Toggles between the selected loudspeaker terminals: speaker A only, speaker B only, speaker A and B together, or all speakers off.
  5. STEREO/MONO - Used only when FM is selected. Toggles between FM stereo output and FM mono output. For low quality stereo FM signals, selecting mono can usually reduce the noise.

Note: Some FM stations are mono only, and selecting Stereo will have no effect on these.

  1. MODE - Used for DAB/FM mode. Press to cycle the tuning mode between Preset, Auto, and Manual modes.
  2. VOLUME - Increases or decreases the volume of the unit. Also used to change the bass, treble and balance settings when these are selected.
  3. SKIP/SCAN - Used when the DAB/FM tuner is selected.

In Preset mode – Steps up or down through the user-stored presets.

In Auto mode – Search for the previous or next available station with a strong signal.

In Manual mode – Adjusts the frequency in steps, for fine tuning.

  1. MENU - This menu displays some system info, Tone setting, APD setting, Factory reset and Upgrade items. Pressing a second time will return to the previous menu.

Use the volume buttons to change the level of the selected option.

  1. PRESET BUTTONS (1/5, 2/6, 3/7, 4/8) - Used when FM or DAB is selected. These select user-stored station presets.

Pressing a preset button once will select one of the first 4 presets.

Pressing and holding will select the later 4 presets.

8 presets are available directly from the remote, further presets can be selected in Preset mode by using the Skip/Scan buttons.

  1. SOURCE BUTTONS (D1, D2, D3, A1, A2, A3/Aux, Phono, DAB/FM) - Press the relevant button to select the desired music source.
Remote Control