Selecting this source allows the EXA to receive Bluetooth audio from most phones, tablets, and laptops.
The supplied Bluetooth antenna must be inserted into the rear of the unit to enable Bluetooth functionality.
Pairing
To begin streaming high quality music from your device it will first need to be paired with the EXA. Select the Bluetooth source on the EXA to enter discovery mode.
Your device can only be paired and connected to the EXA while the Bluetooth source is selected. This can be done by selecting the Bluetooth source button on the front panel. The Bluetooth source is shown as being selected by the symbol being lit blue.
The EXA is always in discoverable mode when there is no Bluetooth connection. Discoverable mode means that the EXA can be paired to another Bluetooth device.
Bluetooth troubleshooting guide
If you are having problems connecting your Bluetooth device to the EXA, please try the following troubleshooting steps:
- Ensure that the supplied Bluetooth antenna is properly connected to the back of the unit. The EXA100 will be unable to connect to a Bluetooth device without the antenna connected. Try disconnecting and then re-connecting the antenna.
- Ensure that the Bluetooth source has been selected by selecting the Bluetooth button on the front panel.
- Ensure that your Bluetooth device is in pairing mode and not already connected to another Bluetooth unit.
- Forget the EXA from your device's list of discoverable Bluetooth items and start the pairing process again.
- Perform a factory reset on the EXA (see 'Setup Menu' section for more details).