Bluetooth

Selecting this allows the EDGE A to receive wireless Bluetooth audio from most phones, tablets and laptops.

PAIRING

To begin streaming high quality music from your chosen media source, it will first need to be paired with the EDGE A.

Notes:

• Your device can only be paired and connected to the EDGE A while the Bluetooth source is selected.

• The EDGE A is always in discoverable mode when there is no Bluetooth connection. Discoverable mode means that the EDGE A is able to be paired to another Bluetooth device.

• The supplied Bluetooth antenna must be inserted into the rear of the unit to enable Bluetooth functionality.

Bluetooth troubleshooting guide

If you are having problems connecting your Bluetooth device to the EDGE A, please try the following troubleshooting steps:

1. Ensure that the supplied Bluetooth antenna is properly connected to the back of the unit. The EDGE A will be unable to connect to a Bluetooth device without the antenna connected. Try disconnecting and then re-connecting the antenna.

2. Ensure that the Bluetooth source has been selected via the front panel source selector or the source selector buttons on the remote.

3. Ensure that your Bluetooth device is in pairing mode and not already connected to another Bluetooth unit.

4. Forget the EDGE A from your devices’ list of discoverable Bluetooth items and start the pairing process again.

5. Perform a factory reset on the EDGE A (see 'Factory Reset' section below).