Control bus

Connecting the CXC and CXA61/81 control bus

Connecting the CXC and CXA61/81 via the supplied orange Control Bus cables will ensure that the devices are switched off and on at the same time. 

Connect the CXA control bus out to the CXC in.

Note: The CXC and CXA all have an Auto Power Down (APD) function. If APD is enabled and one of the devices is switched on but inactive, the device will automatically power down after the selected APD time. This will then switch off all the other connected devices, due to the Control Bus connection.

If you don't want the devices to go into standby automatically, we would recommend disabling the APD feature on each device.