Operating instructions

Table of Contents

Notes:

  • Your connected EVO 75/150 will need to be switched on and have the 'CD' source selected, in order to achieve audio playback from the EVO CD.
  • Ensure that your EVO 75/150 is running the latest firmware version. Your EVO 75/150 will need to be running Service Pack version v132-b-004 or later for the EVO CD to function.

The EVO CD has been designed to only play:

  • Compact discs
  • Recordable CDs (CD-R)
  • Re-writable CDs (CD-RW) bearing the identification logo shown below.

Note: The CD-R/CD-RW discs should contain properly recorded TOC (Table of Contents) information so that they can be played back.

disc

LOADING AND UNLOADING DISCS

  1. Connect the EVO 75/150 to the EVO CD using the supplied EVO connection cable.

  2. Turn on the EVO 75/150 and and set the source selector to 'CD'.

  3. Using the front panel of the EVO CD or remote control, press the “Open/Close" button to open the disc tray.

  4. Once the disc tray has fully opened, carefully place a disc into the tray with the label side facing upwards.

  5. Close the disc tray by pressing the “Open/Close" button again. When the tray has fully closed the EVO CD will read the disc and the EVO 75/150 will display the content information.

  6. The disc tray can be opened at any time during playback using either the front panel “Open/Close" button, or the one located on the remote control. Only remove an inserted disc after the disc tray has fully opened.

Loading/Unloading discs

Important Information:

  • Do not put anything except for a compact disc into the disc tray as this can damage the mechanism.
  • Do not force the tray by hand during opening and closing operations.
  • To avoid dirt and dust entering the mechanism, keep the disc tray closed when not in use.
  • If the compact disc that you are attempting to load is badly scratched or dirty, the player may be unable to read or play it.
  • Never attempt to load multiple discs into the disc tray at any time.

Normal Disc Play

  1. Connect the EVO 75/150 to the EVO CD using the supplied EVO connection cable.

  2. Turn on your EVO 75/150 and set the source selector to 'CD'. Adjust the volume control to a minimum.

  3. Press the "Open/Close" button to open the disc tray and load a disc.

  4. Press the "Open/Close" button again to close the tray. The EVO CD will read the disc.

  5. To begin playback, press the Play button on the EVO 75/150 or the remote control.

  6. When the last track has finished playing, the display will return to Table of Contents (TOC).

  7. To stop the disc at any point, press the 'Stop' button on the remote control. To pause the disc, press the 'Play/pause' button on the EVO 75/150 front panel, remote control or StreamMagic app. Playback can then be resumed by pressing the 'Play' button again.


LOCATING A SPECIFIC TRACK DURING PLAYBACK

  1. A single short press of the forward 'Skip/Scan' button on the EVO 75/150 front panel, remote control or StreamMagic app will take you to the beginning of the next track on the CD. Repeat as necessary.

  2. A single short press of the reverse 'Skip/Scan' on the EVO 75/150 front panel, remote control or StreamMagic app button will take you to the beginning of the previous track.

LOCATING A SPECIFIC TRACK WHEN PLAYBACK IS STOPPED

  1. A single short press of the reverse 'Skip/Scan' and forward 'Skip/Scan' buttons on the EVO 75/150 front panel, remote control or StreamMagic app will skip between tracks in their relative directions.

  2. Press 'Play' on the EVO 75/150 front panel, remote control or StreamMagic app to start  playback from the selected track.

REPEATING DISCS AND TRACKS & PLAYING TRACKS IN RANDOM ORDER

For more functions, please download our StreamMagic app, please visit: https://www.cambridgeaudio.com/gbr/en/products/streammagic